page 1 100v to 6000v @ 1.0 and 1.5 watts complete list of models on page 2 vdc standard 1 watt - a model 1 . 5 watt option - ah model model maximum output current* 1 model maximum output current* 1 100 vdc a01 10 ma ah01 15 ma 200 vdc a02 5 ma ah02 7.5 ma 250 vdc a025 4 ma ah025 6 ma 300 vdc a03 3.33 ma ah03 5ma 400 vdc a04 2.5 ma AH04 3.75 ma 500 vdc a05 2 ma ah05 3 ma 600 vdc a06 1.67 ma ah06 2.5 ma 700 vdc a07 1.43 ma ah07 2.15 ma 800 vdc a08 1.25 ma ah08 1.87 ma 900 vdc a09 1.1 ma ah09 1.67 ma 1000 vdc a10 1 ma ah10 1.5 ma 1200 vdc a12 0.83 ma ah12 1.25 ma 1500 vdc a15 0.66 ma ah15 1 ma 2000 vdc a20 0.5 ma ah20 0.75 ma 3000 vdc a30 0.32 ma ah30 0.5 ma 4000 vdc a40 0.24 ma C C 5000 vdc a50 0.2 ma C C 6000 vdc a60 0.167 ma ah60 0.25 ma avalanche photodiodes capacitor charging electrophoresis photomultiplier tubes piezo devices mass spectrometry sustaining ion pumps the a series is a new line of ultra-miniature, dc to hv dc convert - ers that set an industry standard in high voltage miniaturization. this unique package occupies less than one tenth of a cubic inch of volume *5 , and features an extremely low profle of only 0.250 inches (6.35mm)! controllable output voltages range from 100 volts to 6000 volts. these component-sized converters are ideal for applications requiring minimal size and weight. please refer to our ag series data sheet for surface mount options. proven reliability options ? proportional input/output ? low noise quasi-sinewave oscillator ? control pin ? low leakage current ? low input/output capacitance ? input to output galvanic isolation ? short circuit protection, 1 minute minimum ? no minimum load required *2 ? mtbf > 1,862,000 hours, per bellcore tr 332 ? no external components required ? rohs compliant ? ul recognized a series isolated, proportional dc to hv dc converters product description product selection table 1 watt and 1.5 watt versions available (a/ah) three input voltage ranges: 0 to 5, 12, or 24vdc (5v only above 3kv) polarity: choose positive or negative output (p/n) extended operating temperature (a models / 1.0w) (t suffx) alternate input / output voltages (consult factory) see ordering information (page 11) extremely low profle: 0.25 inches and volume of < 0.100 cubic inches *5 applications features e344664 now ul recognized 4389u04 www.xppower.com
page 2 input current a models C 1 watt ah models C 1.5 watt vin no-load full-load no-load full-load 5 vdc <300ma <500ma <300ma <550ma 12 vdc <100ma <185ma <125ma <250ma 24 vdc <25ma <60ma <40ma <120ma output voltage* 2 (to select polarity, see pg. 10 - how to order) standard 1 watt - a model 1.5 watt option - ah model model maximum output current *1 ripple p-p *4 model maximum output current *1 ripple p-p *4 0 to 100 vdc a01 10 ma 5% ah01 15 ma 2% 0 to 200 vdc a02 5 ma 1% ah02 7.5 ma 3% 0 to 250 vdc a025 4 ma .90% ah025 6 ma 1.2% 0 to 300 vdc a03 3.33 ma .70% ah03 5 ma .70% 0 to 400 vdc a04 2.5ma .50% AH04 3.75 ma .75% 0 to 500 vdc a05 2 ma .50% ah05 3 ma .70% 0 to 600 vdc a06 1.67 ma 1% ah06 2.5 ma 2% 0 to 700 vdc a07 1.43 ma .50% ah07 2.15 ma 1.2% 0 to 800 vdc a08 1.25 ma 1% ah08 1.87 ma 1.2% 0 to 900 vdc a09 1.1 ma 1% ah09 1.67 ma 1.2% 0 to 1000 vdc a10 1 ma .79% ah10 1.5 ma 1% 0 to 1200 vdc a12 0.83 ma .50% ah12 1.25 ma .60% 0 to 1500 vdc a15 0.67 ma .40% ah15 1 ma .60% 0 to 2000 vdc a20 0.5 ma .30% ah20 0.75 ma .50% 0 to 3000 vdc a30 0.33 ma .20% ah30 0.5 ma .20% 0 to 4000 vdc a40 0.25 ma .12% C C C 0 to 5000 vdc a50 0.2 ma .15% C C C 0 to 6000 vdc a60 0.167 ma .15% ah60 0.25 ma .25% a series electrical specifications* 3 0 to 5v only (for models over 3kv) 4389u04 www.xppower.com
page 3 the a series is a new line of ultra-miniature, dc to hv dc converters that set an industry standard in high voltage miniaturization. this unique pack - age occupies less than one tenth of a cubic inch of volume *5 , and features an extremely low profle of only 0.250 inches (6.35mm)! controllable out - put voltages range from 100 volts to 6000 volts. these component-sized converters are ideal for applications requiring minimal size and weight. turn-on voltage is very low at less than 0.7 volts, allowing for wide output voltage operating range. use of a resonant, quasi-sinewave oscillator and fully shielded transformer result in clean, reliable high voltage conversion with inherently low ripple, emi/rfi and input ripple current, making this product ideal for integration into noise sensitive equipment. a separate high impedance control pin is standard and is designed for external error amplifer and/or dac control in closed or open loop systems. or simply connect the control pin to the + input for proportional input to output operation (see schematic and performance charts below). output power is 1 watt standard, with 1.5 watts available as an option. no minimum load is required. a proprietary vacuum encapsulation process and custom 94v-0 listed, high performance formula are used to achieve excellent high voltage and thermal properties. isolation is +/- 500v bias on the output return. input to output leakage current is very low at less than 100 na and coupling capacitance is also low at <250 pf. the new a series leverages xp emcos best-in-class long term reli - ability, utilizing proven dc to high voltage dc conversion technology, perfected by over four decades of high voltage design experience in the most demanding applications. our extensive in-house capabilities enable us to meet specifc customer requirements with standard, modifed and custom solutions quickly, easily, and economically. technical assistance is readily available. parameter value input voltage 0 to 5, 12, or 24v (for models up to 3kv) 0 to 5v (for models over 3kv) turn-on voltage <0.7 vdc isolation < +/- 500v bias on pin 4 output voltage tolerance +10%, -10% full load, max. input voltage input/output coupling capacitance <250 pf typical input/output leakage current <100 na typical control pin 0 to max. input voltage internal oscillator frequency 50khz - 350khz standard temperature ranges operating: -25 to +75c *6 (case) storage: -55 to +105c extended temperature ranges (-t option) operating: -55 to +85c *6 (case) [a models / 1.0w] storage: -55 to +105c detailed product description a series electrical specifications* 3 4389u04 www.xppower.com
page 4 pin # function 1 (C) input 2 (+) input 3 hv out 4 hv rtn 5 control parameter value weight < 0.20 oz. (5.66 grams) volume < 0.10 cubic inches (1.696 cubic centimeters) dimensions 0.92l (23.37l) x 0.45w (11.43w) x 0.25h (6.35h) a and ah series top view side view mechanical specifications (100v - 2,000v) dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4389u04 www.xppower.com
page 5 parameter value weight < 0.25oz (7.09 grams) volume < 0.12 cubic inches (2.082 cubic centimeters) dimensions 1.129l (28.69l) x 0.45w (11.43w) x 0.25h (6.35h) pin # function 1 (C) input 2 (+) input 3 hv out 4 hv rtn 5 control top view side view mechanical specifications (3,000v - 5,000v) a and ah series dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4389u04 www.xppower.com
page 6 parameter value weight < 0.30 oz. (8.49 grams) volume < 0.15 cubic inches (2.45 cubic centimeters) dimensions 1.33l (33.78l) x 0.45w (11.43w) x 0.25h (6.35h) top view side view mechanical specifications (6,000v) a and ah series dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) pin # function 1 (C) input 2 (+) input 3 hv out 4 hv rtn 5 control 4389u04 www.xppower.com
page 7 a series 100v - 2,000v 3,000 - 5,000v need updated drawing note: no traces to be routed within the shaded area on the component side of the pwb. note: no traces to be routed within the shaded area on the component side of the pwb. mechanical specifications dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4389u04 www.xppower.com
page 8 a series 6,000v mechanical specifications dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4389u04 www.xppower.com
page 9 typical hv output vs. control voltage 0 50 100 150 200 250 300 0 10 20 30 40 50 60 70 80 90 100 % control voltage note: vin held at maximum % hv output full load output no load output (a) no load output (ah) safe operating limit typical input vs. output voltage 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 % input voltage note: control pin tied to vin pin % output voltage loaded unloaded (a) unloaded (ah) a series application notes typical hv output vs. control voltage typical input vs. output voltage output voltage is load dependent. under light or no-load conditions, reduce the input voltage so maximum rated output voltage is not exceeded. 4389u04 www.xppower.com
page 10 how to order a - model 20 - output voltage/100 (see table) n - polarity designator example: a20n-12t (a - model, 20 - output voltage, n - negative, 12 - input voltage, t - extended operating temperature) p art number selector: model number: a 20 n - 12 t t - extended operating temperature 12 - input voltage ordering information order code output voltage 1 watt a 1.5 watt ah polarity designator positive output p negative output n input voltage 5 vdc 5 12 vdc 12 24 vdc 24 standard temperature ranges operating: -25 to +75c *6 (case) blank storage: -55 to +105c blank extended temperature ranges operating: -55 to +85c *6 (case) [a models / 1.0w] t storage: -55 to +105c t *note: 1. at maximum rated output voltage 2. output voltage is load dependent. under light or no-load conditions, reduce the input voltage so maximum rated output voltage is not exceeded. 3. specifcations after 30 minute warm-up, full-load, at 25oc, unless otherwise noted. 4. ripple may be reduced substantially by the addition of an external rc flter . 5. volume will vary depending on package size. 6. proper thermal management techniques are required to maintain safe case temperature at maximum power output. a series option codes xp emco reserves the right to make changes on products and literature, including specifcations, without notice. xp emco standard product models are not recommended for copy-exact applications or any other application restricting product changes. copy-exact options are available. please contact an xp emco sales representative for more details. 4389u04 www.xppower.com
|
